Continuum Complete 8.0.0 for Avid DS Release Notes
From BorisFX
(first draft) |
m (Protected "Continuum Complete 8.0.0 for Avid DS Release Notes" ([edit=sysop] (indefinite) [move=sysop] (indefinite)) [cascading]) |
Revision as of 21:05, 9 April 2012
Boris Continuum Complete AVX 8.0.0 for Avid DS Release Notes
Welcome to BorisFX
Boris Continuum Complete AVX (BCC AVX) for Avid DS runs on the AVX 2.0 architecture. For more information about BCC8 software updates, other Boris products, and additional resources, visit our web site at http://www.borisfx.com.
Boris Continuum Complete AVX 8 for Avid DS supports the following Avid host applications:
Avid DS 10.5 running Windows Professional OS™ 7x64.
What's new in BCC 8 AVX (Summary of major changes since BCC7):
• 9 ew filters including support for the 3D Objects family of 3D extrusion filters:
-Extruded EPS
-Extruded Spline
-Extruded Text
-Film Glow
-Layer Deformer
-Lens Flare 3D
-Stage Light
-Type On Text
-Videoscope
• Float bit depth rendering added to nearly all filters.
• Addition of the Integrated Beat Reactor to many filters.
• New/Revised Filter Categories.
BCC AVX 8.0.3 - Known Issues and Limitations:
• BCC RT Wipe transitions are reversed (meaning the outgoing and incoming sources are swapped). This means that when using the RT versions of these wipes it is necessary to manually keyframe the transition (rather than using the Auto Mode) to get the correct result.
• BCC RT filters show color shift when Safe Levels checkbox is enabled. This means that it is necessary to disable the Safe Levels checkbox for the RT effects to get the correct output. If it is necessary to limit the levels of these effects it must then be done as a post process.
• The Beat Reactor audio graph becomes less accurate as the Freqeuncy Resolution is increased to high values. As a temporary workaround use low values near the default setting of 32.
• In filters with more than one Motion Tracker point (e.g. BCC Witness Protection), saving/loading the motion tracker data only works for the first tracker point.
• When Burnt Film is applied as a transition the Reverse Transition checkbox does not function properly unless the incoming clip is selected in the Incoming Layer control which should happen automatically instead of of requiring this additional manual step.
• When choosing grain profiles in Match Grain, you must first manually enable the Lock Samples checkbox or manually change the Sample Layer to none or the newly loaded grain profile will be ignored.
• Snow sometimes shows differences in the snow pattern between 8 and 16 bit renders.
• Using Image Collection shapes to define particle shapes in Particle Array and Pin Art can show clipping artifacts if the particle size is large and the apply mode is normal. Use alternate particle shapes, smaller particle sizes, and/or the Add apply mode as a temporary workaround.
• BCC LED shows occasional mis-colored dots on Quadro FX 3500 cards.
•
Registration and Technical Support:
Make sure to register your product in order to receive the latest technical and upgrade information. Registered users are often eligible to download free BCC filters from the Boris FX website. Any free filters will be available on the Downloads page at http://www.borisfx.com.
You can register online at http://borisfx.com/support/register.html. We offer registered users one year of free technical support starting from the date of purchase.
Contacting Technical Support:
For technical support, contact Boris Continuum Complete AVX technical support specialists:
web: http://www.borisfx.com/support/
e-mail: support@borisfx.com
- END
